GEONAV FISH 32
For professional fishing

The GEONAV FISH 32 is the software ideal for sport and/or professional fishing: multitrack function, conversion of tracks to active routes, route and distance from four landmarks, displacement of routes by degrees or by distance, fishing logbook, GOTO function for setting the target waypoint, colored tracks, EVENT function, handling of up to 10 serial ports, possibility to mark some areas with entrance alarms and the A.I.S. function.
The GEONAV FISH 32 uses Navionics Gold™ charts stored on CD or on CompactFlash™.

HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium III processor or similar
128Mbytes RAM or greater
Minimum 50 Mbytes Hard Disk free (without charts)
SVGA card or above
USB port for EUTRON SmartKey
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above
CF reader Dazzle 6in1 (if used cartography on Compact Flash)

GEONAV FISH 32 ADDS-ON
METEO MODULE Allows displaying the weather forecast on the chart (pressure, wind speed and direction, temperature, wave motion direction and speed).	TIDAL STREAM MODULE Allows the user to compute and display (numerically and graphically) offshore tidal stream directions and speeds for North East Atlantic seas. Information provided by the software allows plotting a route, defining the corrections to apply to balance the stream effects.	PRODUCT CODE NAV60093

CHF 1'232,40

GEONAV POWER
Designed for motorboats and motoryachts

The GEONAV POWER, designed for motorboats, allows displaying the data coming from the onboard instruments both in analog and digital format. All charting operations can be carried out by a simple click of the mouse.
Some additional functions such as the built-in logbook, the route planning, the management of fuel consumption data and the A.I.S. function are also available.
The GEONAV POWER uses Navionics Gold™ charts stored on CD or on CompactFlash™.

HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium III processor or similar
128Mbytes RAM or greater
Minimum 50 Mbytes Hard Disk free (without charts)
SVGA card or above
USB port for EUTRON SmartKey
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above
CF reader Dazzle 6in1 (if used cartography on Compact Flash)

GEONAV POWER ADDS-ON
ARPA MODULE Can be used only if the PC is interfaced with an ARPA Radar. ARPA targets are boats identified and followed calculating their routes and speeds, so as to check if the course followed may cause a collision with another vessel.	METEO MODULE Allows displaying the weather forecast on the chart (pressure, wind speed and direction, temperature, wave motion direction and speed).	TIDAL STREAM MODULE Allows the user to compute and display (numerically and graphically) offshore tidal stream directions and speeds for North East Atlantic seas. Information provided by the software allows plotting a route, defining the corrections to apply to balance the stream effects. User can also ask this module to work out the shortest passage time. PRODUCT CODE NAV60094

CHF 645,50

GEONAV WIND
Designed for sailboats and sailing yachts

Besides all the functions typical of the GEONAV POWER, the GEONAV WIND, designed for sailboats, reads the data coming from the wind station and shows them according to the boat’s polar curves. Moreover, the graphical data presentation allows tuning the boat’s performance.
The GEONAV WIND uses Navionics Gold™ charts stored on CD or on CompactFlash™.

HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium III processor or similar
128Mbytes RAM or greater
Minimum 50 Mbytes Hard Disk free (without charts)
SVGA card or above
USB port for EUTRON SmartKey
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above
CF reader Dazzle 6in1 (if used cartography on Compact Flash)

GEONAV WIND ADDS-ON
ARPA MODULE Can be used only if the PC is interfaced with an ARPA Radar. ARPA targets are boats identified and followed calculating their routes and speeds, so as to check if the course followed may cause a collision with another vessel. METEO MODULE Allows displaying the weather forecast on the chart (pressure, wind speed and direction, temperature, wave motion direction and speed).	TIDAL STREAM MODULE Allows the user to compute and display (numerically and graphically) offshore tidal stream directions and speeds for North East Atlantic seas. Information provided by the software allows plotting a route, defining the corrections to apply to balance the stream effects. User can also ask this module to work out the shortest passage time.	“ROUTAGE” MODULE Allows the route planning according to the weather forecast (wind speed and direction) and the vessel characteristics (polar diagram). The software is available as an option for GEONAV WIND only, and requires the METEO MODULE. PRODUCT CODE NAV60095

CHF 942,80

NAVIONICS NAVPLANNER GOLD/PLATINUM & USB Card reader

CHF 408,05

GEONAV POWER PACK (Geonav Power- + ARPA- & METEO-PACK)
Designed for motorboats and motoryachts

The GEONAV POWER, designed for motorboats, allows displaying the data coming from the onboard instruments both in analog and digital format. All charting operations can be carried out by a simple click of the mouse.
Some additional functions such as the built-in logbook, the route planning, the management of fuel consumption data and the A.I.S. function are also available.
The GEONAV POWER uses Navionics Gold™ charts stored on CD or on CompactFlash™.

HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium III processor or similar
128Mbytes RAM or greater
Minimum 50 Mbytes Hard Disk free (without charts)
SVGA card or above
USB port for EUTRON SmartKey
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above
CF reader Dazzle 6in1 (if used cartography on Compact Flash)

GEONAV POWER ADDS-ON
ARPA MODULE Can be used only if the PC is interfaced with an ARPA Radar. ARPA targets are boats identified and followed calculating their routes and speeds, so as to check if the course followed may cause a collision with another vessel.	METEO MODULE Allows displaying the weather forecast on the chart (pressure, wind speed and direction, temperature, wave motion direction and speed).	TIDAL STREAM MODULE Allows the user to compute and display (numerically and graphically) offshore tidal stream directions and speeds for North East Atlantic seas. Information provided by the software allows plotting a route, defining the corrections to apply to balance the stream effects. User can also ask this module to work out the shortest passage time. PRODUCT CODE NAV60094

CHF 1'221,60

GEONAV WIND PACK (Geonav WIND + ARPA- & METEO-Pack)
Designed for sailboats and sailing yachts

Besides all the functions typical of the GEONAV POWER, the GEONAV WIND, designed for sailboats, reads the data coming from the wind station and shows them according to the boat’s polar curves. Moreover, the graphical data presentation allows tuning the boat’s performance.
The GEONAV WIND uses Navionics Gold™ charts stored on CD or on CompactFlash™.

HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium III processor or similar
128Mbytes RAM or greater
Minimum 50 Mbytes Hard Disk free (without charts)
SVGA card or above
USB port for EUTRON SmartKey
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above
CF reader Dazzle 6in1 (if used cartography on Compact Flash)

GEONAV WIND ADDS-ON
ARPA MODULE Can be used only if the PC is interfaced with an ARPA Radar. ARPA targets are boats identified and followed calculating their routes and speeds, so as to check if the course followed may cause a collision with another vessel. METEO MODULE Allows displaying the weather forecast on the chart (pressure, wind speed and direction, temperature, wave motion direction and speed).	TIDAL STREAM MODULE Allows the user to compute and display (numerically and graphically) offshore tidal stream directions and speeds for North East Atlantic seas. Information provided by the software allows plotting a route, defining the corrections to apply to balance the stream effects. User can also ask this module to work out the shortest passage time.	“ROUTAGE” MODULE Allows the route planning according to the weather forecast (wind speed and direction) and the vessel characteristics (polar diagram). The software is available as an option for GEONAV WIND only, and requires the METEO MODULE. PRODUCT CODE NAV60095

CHF 1'500,40

GEONAV PC NAVIGATION
The perfect software for your PC

The GEONAV PC NAV, designed for all kind of boats, is the perfect software to satisfy any navigation needs. With the connection to a GPS antenna, GEONAV PC NAV is easy to install and really intuitive to utilize thanks to a new system of clear icons . All charting operations can be carried out by a simple click of the mouse, and Routes, Tracks and Markers can be easily trasferred from your PC to other Geonav plotters and vice versa.
The A.I.S. function is available: when connected to a specific receiver, this device will allow you to indetify every boat or ship transmitting this specific signal, and to see its position directly on the cartography.
The GEONAV PC NAV utilizes Navionics Gold™ charts stored on CD or on CompactFlash™.

HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium 100 processor or 300 Mhz
256Mbytes RAM or greater
Minimum 2 Gbytes Hard Disk free (without charts)
SVGA card or above
USB port
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above

PRODUCT CODE
NAV60098 PC NAV
NAV60099 PC NAV with Compact Flash Reader

CHF 344,15

GEONAV PC NAVIGATION incl. AIS + GEONAV routing planner & USB Card Reader (CF/SD)

The perfect software for your PC

The GEONAV PC NAV, designed for all kind of boats, is the perfect software to satisfy any navigation needs. With the connection to a GPS antenna, GEONAV PC NAV is easy to install and really intuitive to utilize thanks to a new system of clear icons . All charting operations can be carried out by a simple click of the mouse, and Routes, Tracks and Markers can be easily trasferred from your PC to other Geonav plotters and vice versa.
The A.I.S. function is available: when connected to a specific receiver, this device will allow you to indetify every boat or ship transmitting this specific signal, and to see its position directly on the cartography.
The GEONAV PC NAV utilizes Navionics Gold™ charts stored on CD or on CompactFlash™.

HW REQUIREMENTS
For the best use of GEONAV products the minimun hardware/software requirements are:
Pentium 100 processor or 300 Mhz
256Mbytes RAM or greater
Minimum 2 Gbytes Hard Disk free (without charts)
SVGA card or above
USB port
RS232 Serial port
Microsoft® Mouse or similar
Windows® 98 or above

PRODUCT CODE
NAV60098 PC NAV
NAV60099 PC NAV with Compact Flash Reader

CHF 370,55