An analysis of the existing electronic and electrical installations is carried out on board the yacht prior to the installation /assembly of new electronic devices or of the SIC system by Nautic Electronics. On the basis of this analysis a concept and a quote will be drawn up and passed on to the yacht owner. After the placing of the order Nautic Electronics will agree upon further actions and the scheduling of installation work with the customer.

The analysis is not free of charge. On a subsequent placing of order according to the concept suggestion, the customer is only invoiced 50 % of the analysis costs on the total following order sum. Exempt from this are travel costs and expenses.

The analysis is viewed as a preliminary project by Nautic Electronics and serves to convey the clear costs and expenditure and thus allows for a proper design conception and approach.

Nautic Electronics principally takes on the complete assembly of position finding, radio, message and navigation devices as well as further machines and power units on board on behalf of and by order of the customer. The devices are assembled by Nautic Electronics’ specialists themselves or by a representative authorised by Nautic Electronics after delivery of the contractually agreed delivery specification to the customer. The customer is to ensure that specialists from Nautic Electronics or their representatives attain appropriate access to the respective yacht. Dates are pre-set or separately determined in individual cases.

This therefore results in the installation by order and in agreement with Nautic Electronics.

The start-up and transfer of devices is carried out by the representative of Nautic Electronics or by Nautic Electronics. In each case the transfer to the customer is carried out together with a representative of Nautic Electronics and a joint transfer protocol is drawn up and signed.

Sketches, documents and drawings required for the correct assembly are to be provided to Nautic Electronics or its representative by the purchaser prior to the beginning of installation work. After approval of the whole projects, documents made available to Nautic Electronics or its representative will be returned to the customer.

Below the shipbuilding operations are specified, which are part of the delivery and service specifications of the purchaser:

All operations required for fastening the individual device, i.e. deck breakthroughs, brackets, protective tubing, manufacture of auxiliary masts, other masts etc.

Observance and maintenance of regulations for the insulation of stays and earthing; electronic radio interference suppression of machines and devices on board ocean-going and inland navigation vessels

The cabling for devices within the radio room is to be carried out by specialists authorised by Nautic Electronics. This special cable is also delivered by the people installing the devices. The delivery of the special cable is not included in the price of devices and is invoiced separately on a time and material basis. The delivery, laying and assembly of the cable outside of the radio room or the retraction of the protective tubing for the cable is carried out by the purchaser or by a company authorised by the purchaser. All operations and tasks are appropriately organised and coordinated by specialists from Nautic Electronics.

The purchaser authorises the manufacture of all necessary protective boxes, brackets etc. that are required for the assembly of device units. These include the assembly of electronic converters, emergency batteries and other objects required for fitting and assembly. These tasks can also be taken over by Nautic Electronics, but are also invoiced separately.

The purchaser is to ensure that all fitments required for assembling the devices or authorised by authorities are delivered in due time, on time and in agreement with Nautic Electronics. The purchaser is to take into consideration regulations by the authorities regarding radio room fixtures.

The delivery specifications of the purchaser include, for example, the necessary hemp rope and blocks for the hoisting of antennas, frames and frame fittings as well as the assembly of antennas, fixing of blocks etc.

The devices are connected to the cables laid down by well-trained specialists appropriately certified by Nautic Electronics who are experienced in the field of electronics, informatics and communication. After start-up the facility is shown to be operable and transferred to the owner or his authorised representative. All transfer costs are borne by the purchaser. Nautic Electronics offers a special further education and training programme for fixtures and utilisation.

The assembly by the vendor is carried out in a separate order to the assembly conditions of the vendor.

Customers do not have to pay unnecessary and problematic costs for installation when using the tried-and-tested certification system for specialists in informatics, communications and electronics introduced by Nautic Electronics. The customer also receives a high degree of reliance for the units and systems installed by Nautic Electronics specialists and the installation time is massively reduced by specialist know-how.

Nautic Electronics guarantees a correct, high-quality delivery and installation of all electronic units on board a yacht.